Our diligent let you experience by yourself.

Keystone Mount Red RCA Connector (03-0202-00)
These Keystone inserts feature standard RCA female jacks, color coded red, white or yellow. Rear mounted IDC connector allows simple, fast connection to any 22~24AWG solid or stranded, UTP or shielded wire.

Note：

Righ channel Audio , Red RCA Female to Toolless IDC, for Keystone mounting

Keystone Mount Yellow RCA Connector (03-0204-00)
These Keystone inserts feature standard RCA female jacks, color coded red, white or yellow. Rear mounted IDC connector allows simple, fast connection to any 22~24AWG solid or stranded, UTP or shielded wire. 

Note：

Video Adaptor , Yellow RCA Female to Toolles IDC , for Keystone mounting.

Standard Single Type / Screw

The standard single baluns come with a BNC coaxial connector and a RJ45 twisted pair connection.

The CCTV Video Balun allows baseband composite signal to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile cabling.

The CCTV Balun is used in pairs to allow you to eliminate more expensive coaxial cable, including coupling signals from remote video cameras to display systems, video retrieve, security and surveillance monitoring applications.

The use of existing twisted pair infrastructure such as telephone cable and Cat.5 computer networking cables are also available. All our baluns are 100% test for reliability and durability to guarantee your signal integrity.

※Specification

1. Cable-UTP: 24AWG or lower solid copper twisted pair wire

  Impedance: 100 ohm at 1MHz

  Max. Capacitance: 20pf/ ft

  Attenuation: 6.6db/ 1000ft at 1MHz

2. Cable-BNC

  Impedance: 75 ohm at 1MHz (RG59/U)

  Max.25ft of coax allowed per end to end link

3. Max. Distance

  Color: Cat.3 1200ft; Cat.5 2230ft

  Monochrome: Cat.3 1500ft; Cat.5 2550ft

4. Temperature

  Operating temp. 0 to 55°C

  Storage temp. -22 to 85°C

  Humidity up to 95%

5. No AC power or batteries needed

  Bi-directional signal conversion

  Ultra-miniature enclosure electrical

※Electrical Characteristic and Performance

1. Bandwidth: Video DC to 8 MHz

2. Maximum input: 1.1 Vp-p

3. Impedance: 75 ohm to 100 ohm

4. Insertion Loss: Max. 2db per pair over the frequency range form DC to 8 MHz

5. Return Loss: Greater than 15db over the frequency range form DC to 8 MHz

6. Common mode rejection: Greater than 40db at 8 MHz

※Wiring

This diagram is explaining the wiring layout of standard RJ45 connectors in Network applications. When looking at RJ45 connector from the bottom, with the spring tab facing down, pin 1 will appear on the left.

1	Orange / White	1		5	Blue / White	5
2	Orange	2		6	Green	6
3	Green / White	3		7	Brown / White	7
4	Blue	4		8	Brown	8

※Importance Note

Baluns must be used in pairs.